FSI® offers leading edge pneumatic shelter systems in sizes 100 – 1,850 sq. ft. plus. In recognition of the extreme requirements of the surge capacity markets that may require shelter systems to be in place in all manner of severe weather for extended durations of weeks and even months FSI is pleased to offer a most robust, durable range of shelters to meet this demand.

Features and Benefits:

Quadruple overlapped and glued seams that result in a system that stands for weeks and weeks on end in any and all weather conditions and temperatures without need of re-inflation. In addition FSI uses the same heavy duty air berm materials in all shelters as are used in the highly respected and very rugged FSI Rescue Boat range – for the most cut and abrasion resistant products on the market.

FSI employs a tapered air berm structure for added strength and double interlocking air berms with fill ports on each end to prevent total shelter collapse in the very unlikely event of air berm failure. FSI uses an integral base air berm around the entire bottom edge of the shelters for added structural strength and excellent lateral strength in high wind conditions of up to 70 mph plus.

FSI uses only USA made inflation deflation valves – far superior to import valves.

FSI shelters have a low ambient internal air pressure - approx. 4 psi when berms are fully inflated and 'rock hard' and air berms remain standing when internal air pressure is as low as approx. 1.5 psi – units that work for you.

Every shelter with a width of over 10 ft - regardless of length and overall size offers a top center air berm running the entire length of the unit at the roof line and secondary full center length air berms running on either side of the main center berm approx. 18 - 24" off center. FSI offers a total of five 8” - 12" diameter lateral roof support air berms - size of shelter dependent. FSI shelters lead the industry in terms of weight/snow bearing capabilities/strength. FSI shelters are so strong a grown man can walk up and over them. Whatever the specification at hand FSI shelters meet and exceed.

Available F-INSULCAN inner canopy for approx. estimated R 8 insulation factor – ideal in both hot and cold environs.

Available F-FLDS full length plenum for HVAC – superior air distribution internally and thus comfort for patients and care givers.

Available full 40” center aisle walkways for efficient patient and care giver movement.

Available # F-STRSCR 'PVC strip screens' to allow for bump thru entry/exit with minimal air flow disruption in all 40" wide center aisle and side entry man doors to be inside already standard double sided full closure zipper entry/exit doors. Designed to meet and exceed CDC required 12 plus air exchanges per hr.

Available multiple entry/exit door configurations to meet all needs.

Available 10" or longer on demand HD velcro fabric flange all the way around the door down to the floor in all cases with double sided zipper connections to attach to the same 10" or longer HD velcro fabric flange off the next unit - thus 20" tent like attachment areas are created between all man doors to the next units end to end or side to side. Such a configuration allows pass thru between units in comfort.