DAT3030

    Air pressure internally once inflated = 4.3 psi (0.3 bar)USA Federal Standard FS # 191 5041/5102/5134/5970 Test Method Structural Test resultsTotal Weight (g/m2) – 1055  Thickness (mm) – 0.90Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404Elongation (%) – Warp = 30 - Weft = 47 Tongue tear (lbs.) – Warp = 87 – Weft = 100 Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9 Density = 30 X 24.5

Frame:  Heavy Duty 1100 Dtex polyester coated w. plastomer on both sides, UV/Chemical resistant. 

Canopy:   Heavy duty 200 denier 3/5 twill nylon coated w. polyurethane on both sides.  UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi +  -  Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 -  Fire resistance meets and exceeds CPAI 84 SECTION 5  1995, US Fed. Test CFR.1610, NFPA 702 w. ‘A’ burn scale rating. 

    All Shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, air inflation valve, one air inflation hose w. safety cord, pressure relief valve, Tie Down Ropes and 4 D-rings to tie off to, Repair kit, manual, carry bag, 2 upper air vents, and a hammer.   All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms.