Multi Purpose Rapid Deploy Shelters arrow Standard Pneumatic Shelters arrow DAT3015



DAT3015

DAT®3015 Approx. 10’W X 15’L X 9’H (3M X 4.5M X 2.7M) – Shelter only, 150 sq. ft. (13.5 M²), 100 lbs. (40 kg).Carton size approx. = 120 X 61 X 40.5 cm (48”L X 24”W X16”H). 2 windows – one on each side, 2 skylights, 2 (two) 14”/35 cm HVAC/clothesinlet/

Price:  Contact Us for Pricing
FSI # DAT®  SERIES INFLATABLE SHELTER SYSTEMS ALL FSI SHELTERS REGARDLESS OF SIZE GENERAL SPECIFICATIONS

 

    Air pressure internally once inflated = 4.3 psi (0.3 bar)USA Federal Standard FS # 191 5041/5102/5134/5970 Test Method Structural Test resultsTotal Weight (g/m2) – 1055   Thickness (mm) – 0.90Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404Elongation (%) – Warp = 30 - Weft = 47  Tongue tear (lbs.) – Warp = 87 – Weft = 100  Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9   Density = 30 X 24.5

  

Frame:  Heavy Duty 1100 Dtex polyester coated w. plastomer on both sides, UV/Chemical resistant. 

 

Canopy:   Heavy duty 200 denier 3/5 twill nylon coated w. polyurethane on both sides.  UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi +  -  Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 -  Fire resistance meets and exceeds CPAI 84 SECTION 5  1995, US Fed. Test CFR.1610, NFPA 702 w. ‘A’ burn scale rating. 

 

Floor:  1,000 denier Nylon coated w. PU, tensile strength: 2545N/2360,  Tear Strength: 106/102N, weight: 490 g/yd.     

 

Color:  Standard color is "FSI Blue" Exterior  w. high visibility white inside color.  Green and White exterior  canopy color also available at no extra cost.  Other colors optional with an extra charge.      

    

    All Shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, air inflation valve, one air inflation hose w. safety cord, pressure relief valve, Tie Down Ropes and 4 D-rings to tie off to, Repair kit, manual, carry bag, 2 upper air vents, and a hammer.   All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms.  

    

     Units can attach to a second shower or FSI Shelter.  Simply inflate the unit - plug into a water supply and commence decon in approx. 1 min. Every FSI DAT™ series shelter comes complete with electric inflator/deflator, and high pressure SCBA fitting.All units supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side. Multiple optional accessories available inclusive of air heaters, air coolers, elevation grids, waste water pumps, etc. available.  

 

     DAT®3015 Approx. 10’W X 15’L X 9’H (3M X 4.5M X 2.7M) – Shelter only, 150 sq. ft. (13.5 M²), 100 lbs. (40 kg). arton size approx. = 120 X 61 X 40.5 cm (48”L X 24”W X16”H). 2 windows – one on each side, 2 skylights, 2 (two) 14”/35 cm HVAC/clothes nlet/outlets with tie closures, 10 stainless steel stakes and 4 tie downs.