Rapid Deploy Hazmat Decon Showers, Decon Pools and Liners arrow Hazmat Decon Shower Shelters arrow DAT1010S



DAT1010S

DAT1010S Approx. 3.5' X 3.5' X 8' H, One person Portable Hazmat Decon Shower unit complete, weighs approx. 45 lbs. and comes with 6 spray nozzle heads and a single multi function Trigger gun

Price:  Contact Us for Pricing

  

 

 

 

FSI DAT® 1010S First Responder Hazmat Decontamination Shower

click here to download DAT1010S literature in pdf format 

 

System Frame:  Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemical resistant. 

 

Canopy:   Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58.  Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi +  -  Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating. 

 

Floor:  PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) 660 grams per sq. mm  60” W.    

 

Colors:  Standard color is ‘FSI Blue'.  Green and White also available as standard.  Other colors offered P.O.A. 

 

Technical data:  Air pressure internally once inflated = 4.3 psi (0.3 bar)USA Federal Standard FS # 191 5041/5102/5134/5970 Test Method Structural Test resultsTotal Weight (g/m2) – 1055        Thickness (mm) – 0.90Cut strip tensile strength (lbs. /in.) – Warp = 450  -  Weft = 404Elongation (%) – Warp = 30  - Weft = 47Tongue tear (lbs.) – Warp = 87 – Weft = 100Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9Density = 30 X 24.5 

 

    Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available. 

   

    The DAT®1010S comes equipped as standard equipment with an integrally attached ground floor that will hold up to 50 gallons (200 liters) of water (with an 8”/20cm berm approx.) before requiring pump out, 2 roll up windows – one on each side, 1 skylight, full closure slip in and out dirty entry/clean exit doors on each end,  high pressure air inflation/deflation valve, one air inflation hose w. safety cord, pressure relief valve, 4 stainless steel stakes and ground anchor points, Tie Down Ropes and 4 D-rings to tie off to, Repair kit, manual, carry bag, 2 upper air vents, and hammer.  All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms.   Units can attach to a second shower or FSI Shelter.          The DAT®1010S also comes complete with a qty. of 6 spray nozzle heads and a single 5’ (1.5M) length of coiled ½” (13mm) hose with an attached multiple function spray gun with spray patterns and flows meant to gently yet thoroughly drench and decon victims.  Shutoffs and quick disconnects supplied with every group of shower heads and Trigger Gun.  Flows per shower head and per spray gun = approx. 1 gpm (4 lpm) optimum and dependent on water volumes available. Simply inflate the unit and plug into a water supply.  

    

    DAT®1010S offered with 1 – ¾” (19mm) High pressure 300 psi  (20 bar) GHT threaded inlet hose – other fittings available as specified.  Decontamination can commence in less than 1 minute. Comes complete with electric inflator/deflator, stakes, 1 HVAC hanging duct, repair kit and high pressure SCBA fitting.Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future. 

 

DAT®1010S   Approx. 3.5’ W X 3.5’ L  X  8’ H (1 X 1 X 2.13M),  12 sq. Ft. (1.1M²) ,  45 lbs. (20.5 Kg)  Carton size approx. = 91 X 45 X 30 cm (36” L X 18” W X 12” H) *  1100 dtex material is 1.5mm thick and  consists of 0.62mm plastomer coated PVC/0.3mm polyester yarn/0.62mm plastomer coated PVC