FSI DAT®2525S Single Line Mass Casualty Hazmat Decontamination Shower
System Frame: Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemical resistant.
Canopy: Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating.
Floor: PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) 660 grams per sq. mm 60” W.
Colors: Standard color is "FSI Blue". Green and White also available as standard. Other colors offered P.O.A.
Technical data: Air pressure internally once inflated = 4.3 psi (0.3 bar)USA Federal Standard FS # 191 5041/5102/5134/5970 Test Method Structural Test resultsTotal Weight (g/m2) – 1055Thickness (mm) – 0.90Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404Elongation (%) – Warp = 30 - Weft = 47Tongue tear (lbs.) – Warp = 87 – Weft = 100Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9Density = 30 X 24.5
Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available.
The FSI DAT®2525S is a one - line wide 7' W X 13’ L X 8’ H (2.13 X 3.95 X 2.43 M), 3 station - 4’L, 5’L, 4’L (1.2 M, 1.50 M, 1.2 M) Mass Casualty Decon Shower System which handles a single line of ambulatory casualties in three sequential stations --- (1) undress, (2) shower 3) redress. This unit deploys in under two minutes, and processes three ambulatory personnel at a time (one in each stage of the unit). Undress and redress stations are dry (plumbing is possible and optional); the middle shower station includes 6 shower heads (2 sections of 3 shower heads) and 2 hanging coiled ½”/13 mm hose lines with attached multiple function trigger guns which thoroughly drench and decontaminate via a fine water mist for a total of 8 shower heads as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. Flows per shower head and per spray gun = approx. 1 gpm/4 lpm optimum and dependent on water volumes available. As an option -- by configuring the changing areas on both ends as Decon showers one can double the capacity as detailed above. Wastewater is contained within integral ground floor and 6”/15 cm berm erected when system is initially inflated (holds approx. 80 gallons – 320 litres - of waste water before pump-out is required). Includes full closure slip in and out dirty entry/clean exit doors on each end, 2 - ½ cross divider curtains, two roll up windows (one on each side), 2 skylights, high pressure air inflation/deflation valve, one air inflation hose w. safety cord, pressure relief valve, 6 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, 2 HVAC/dirty clothes ducts with ties closures, and hammer. All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI Shelter. Simply inflate the unit and plug into a water supply.
DAT®2525S offered with integral ground floor, 1 – ¾” (19mm) high pressure 300 psi (20 bar) GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in 1 - 2 minutes. Comes complete with electric inflator/deflator, and high pressure scba fitting.Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future.
|
Hazmat Decon Shower Shelters 
