Single wide stretcher decon shower system to handle 1 non-ambulatory victim w. attendants, 4 multiple function trigger guns, approx. 7'W X 13'L X 8'H, 90 sq. ft., 93 lbs.
FSI DAT®2626S Single Non-Ambulatory Hazmat Decontamination Shower
SystemFrame:Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemicalresistant.
Canopy:Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58.Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi +-Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating.
Floor:PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) 660 grams per sq. mm60” W.
Colors:Standard color is "FSI Blue".Green and White also available as standard.Other colors offered P.O.A.
Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available.
The FSI DAT®2626S is a one -line wide 7' W X 13’ L X 8’ H (2.13 X 3.95 X 2.43 M), Single Non-Ambulatory Decon Shower System meant to handle a single stretcher borne victim with attendants working on either side.Can also be used to decon 2 walking wounded personnel at a time.This unit deploys in 1 - 2 minutes, and processes one stretcher borne or 2 walking victims at a time.The shower station includes 4 hanging coiled ½”/13 mm hose lines with attached multiple function spray nozzles which thoroughly drench and decontaminates via a fine water mist.Shutoffs and quick disconnects supplied with every trigger gun.Flows per spray gun = approx. 1 gpm/4 lpm optimum and dependent on water volumes available.As an option -- one can double the capacity if required.Wastewater is contained within integral ground floor and 8”/20 cm berm erected when system is initially inflated (holds approx. 220 gallons – 880 litres - of waste water before pump-out is required). Includes full closure slip in and out dirty entry/clean exit doors on each end, two roll up windows (one on each side), 2 skylights, high pressure air inflation/deflation valve, one air inflation hose w. safety cord, pressure relief valve, 6 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, 2 HVAC/dirty clothes ducts with tie closures, and hammer.All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms.Units can attach to a second shower or FSI shelter.Simply inflate the unit and plug into a water supply.
DAT®2626S offered with integral ground floor, 1 – ¾” (19mm) High pressure 300 psi(20 bar) GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in less than 2 minutes.Comes complete with electric inflator/deflator, and high pressure scba fitting.Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future.
DAT®2626SApprox.91 sq. Ft. (8.5M²), 93 lbs. (42 Kg)Carton size approx. = 120 X 60 X 40 cm (49” L X 24” W X 16” H*1100 dtex material is 1.5mm thick and consists of 0.62mm plastomer coated PVC/0.3mm polyester yarn/0.62mm plastomer coated PVC
Hazmat Decon Shower Shelters 
