Hospital Surge Capacity Shelters arrow F-SFSCS-300



F-SFSCS-300

SMALL CAPACITY 10 PERSON MEDICAL SURGE CAPACITY/FIELD HOSPITAL System comes complete with one DAT4070-IS shelter 1 INSULCAN double insulated canopy, 1 F-FLDS integral closed 'plenum' air duct system, 8 F-CDC34A, 1 F-CD34, 4 P-LL, 1 F-EM5500, 10 F-EM-2

Price:  Contact Us for Pricing

DAT®4070 Approx. 13’ W X 23’ L X 9’ H (3.96 M X 7 M X 2.74 M) – Shelter only, 300 sq. Ft., 250 lbs. (112 Kg) Carton size approx. = 126 X 63 X 45 cm (50” L X 25” W X 18” H). 4

 

windows – two on each side, 2 skylights, 2 (two) 14”/35 cm HVAC/clothes inlet/outlets with tie closures, 12 stainless steel stakes and ground anchor points.
Air pressure internally once inflated = 4.3 psi (0.3 bar) SA Federal Standard FS # 191 5041/5102/5134/5970 Test method structural test results

 

Total Weight (g/m2) – 1055

 

Thickness (mm) – 0.90

 

Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404

 

Elongation (%) – Warp = 30 - Weft = 47

 

Tongue tear (lbs.) – Warp = 87 – Weft = 100

 

Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9

 

Density = 30 X 24.5

 

Frame: Heavy duty 1100 dtex polyester coated w. plastomer on both sides, UV/chemical resistant.

 

Cover: Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant.

 

Floor: PVC coated .52 mm polyester.

 

Color: Standard color is ‘EMS’ Blue exterior w. high visibility white inside color. Green and White exterior canopy color also available at no extra cost.
Other colors optional with an extra charge.

 

    All Shelters have full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors, air inflation valve, one air inflation
hose w. safety cord, pressure relief valve, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, and a hammer.
All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit
integral shower stall air berms. Units can attach to a second shower or FSI shelter. Simply inflate the unit and commence use in approx. 1 - 4 minutes
(size of shelter dependent).

 

    Every FSI DAT® series shelter comes complete with electric inflator/deflator, and high pressure scba fitting. All units supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side.
All DAT® series shelters available with cross and center divider curtains, side doors, extra windows, skylights, HVAC/clothing ducts with ties, etc