DAT QE2525SDAT QE2626S

DAT QE2525SMA

PDFPrint
No image set

DAT2525SMA approx. 7' W X 13' L X 8' H, w. 3 ft. Undress/7 ft. Shower/3 ft. Redress areas. A Single line Ambulatory and/or Non-Ambulatory Decon shower system with 6 spray nozzles and 2 multiple function trigger guns, 90 sq. ft., 145 lbs.

Description

DAT2525SMA approx. 7ft W X 13ft L X 8ft H, w. 3 ft. Undress/7 ft. Shower/3 ft. Redress areas. A Single line Ambulatory and/or Non-Ambulatory Decon shower system with 6 spray nozzles and 2 multiple function trigger guns, 90 sq. ft., 145 lbs.

 

Files:
Name File size    
2011_dat_qe_shelters 1001.09 KB

decon_manual_2016 5.92 MB

Technical Specs

FSI DAT® QE2525SMA Single Line Mass Casualty Hazmat Decontamination Shower System

 

Frame: Heavy duty patent pending lattice framework retractable, corrosion resistant, coated, lightweight aluminum tubing. Frame supports 250 lb. hang weight +. Width: 45mm Thickness: 1.2mm Weight: 570g / m2 Tensile strength: 17 Kg/mm2   Tear strength: 10 Kg/mm2   Canopy:   Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds US Fed. Test CFR.1610, NFPA 702 w. ‘A’ burn scale rating. Floor: PVC coated HD .52 mm polyester.

 

‘Quick Erect’ General Set up and Tear down Instructions:

 

All parts are pre-assembled with no special tools required. All components are of telescoping aluminum with locking hinges, caps, and scissor connected support frames and guide rails for ease of movement for ‘Quick Erect’

To ‘Quick Erect’ simply release handle lock, have 2-4 support personnel grip side frame & pull the width support frames slowly – until all hinges lock. Ease roof frame upwards. Then pull the Length support frames until locked. Check and final position canopy, floor and decon pool. Commence use.

 

Standard color is ‘EMS’ Blue. Green and White also available at no extra cost. Other colors optional with an extra charge.

 

The FSI DAT® QE2525SMA is a one - line wide 7' W X 13’ L X 8’ H (2.13 M X 3.95 M X 2.43 M), 3 station - 3’L, 7’L, 3’L (.91 M, 2.13 M, .91 M) Mass Casualty Decon Shower System which handles a single line of ambulatory casualties in three sequential stations --- (1) undress, (2) shower 3) redress. This unit deploys in approx. 3 minutes, and processes three ambulatory personnel at a time (one in each stage of the unit). With the 7’ L decon pool area this unit can also accommodate a single non-ambulatory victim in the middle shower stall area with attendants on either side of the victim.

 

Undress and redress stations are dry (plumbing is possible and optional); the middle shower station includes 6 shower heads (2 sections of 3 shower heads) and 2 hanging coiled ½”/13 mm hose lines with attached multiple function trigger guns which thoroughly drench and decontaminate via a fine water mist for a total of 8 shower heads as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. Flows per shower head and per spray gun = approx. 1 gpm/4 lpm optimum and dependent on water volumes available. As an option -- by configuring the changing areas on both ends as Decon showers one can double the capacity as detailed above.

  

Wastewater is contained within integral ground floor and 6”/15 cm pop up berm erected when system is initially set up (holds approx. 150 gallons – 600 litres - of waste water before pump-out is required).

 

Includes full closure slip in and out dirty entry/clean exit doors on each end, 2 - ½ cross divider curtains, two roll up windows (one on each side), 2 skylights, 6 stainless steel stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, carry bag, 2 upper air vents, 2 HVAC/dirty clothes ducts with ties closures, and hammer. All canopy walls are velcro’d to the floor berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms.   Units can attach to a second shower or FSI Shelter.

 

Simply set up the unit and plug into a water supply. DAT® QE2525SMA offered with integral ground floor, 1 – ¾” (18mm) high pressure 300 psi (20 bar) GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in approx. 3 minutes.

 

Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available.

 

Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future.

 

DAT® QE2525SMA Approx. 91 sq. Ft. (8.5 M²), 145 lbs. (66 Kg)

 

Carton size approx. = 149 X 66 X 45 cm (59” L X 26” W X 18” H)