DAT2020S Portable Pneumatic Hazmat Decon Shower -Approx. 7’ W X 7’ L X 8’ H, 50 sq. Ft., 90 lbs. 7 spray nozzle heads, one multi function Trigger gun. First Responder Portable Haz mat Decon shower system complete.


DAT2020S Portable Pneumatic Hazmat Decon Shower -Approx.  7’ W X  7’ L  X  8’ H,   50 sq. Ft.,  90 lbs.  7 spray nozzle heads, one multi function Trigger gun.  First Responder Portable Haz mat Decon shower system complete. 


Comes complete with electric inflator/deflator, stakes, repair kit and high pressure SCBA fitting.

Name File size    
dat2020s_lit 63.38 KB

decon_manual_2016 5.92 MB



Technical Specs

FSI # DAT® 2020S First Responder Hazmat Decontamination Shower System


Frame: Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemical resistant, quadruple overlapped and glued. Canopy:   Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating. All seams double stitched and coated both sides.

Inner canopy: If applicable - of 100% NYLON 210T ANTRON W/R, POLYURETHANE COATED 57/58", Color: White - Flame Retardant to meet 'NFPA-701 TM-1', Anti-fungus/Anti-mildew, opaque

Floor: PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) 660 grams per sq. mm 60” W.  


Standard color is ‘FSI Blue’®, Green, White and Tan/Sand also available as standard. Other colors offered P.O.A.


Technical data:

Air pressure internally once inflated = 4.3 psi (0.3 bar)

USA Federal Standard FS # 191 5041/5102/5134/5970 Test Method Structural Test results

Total Weight (g/m2) – 1055

Thickness (mm) – 0.90

Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404

Elongation (%) – Warp = 30 - Weft = 47

Tongue tear (lbs.) – Warp = 87 – Weft = 100

Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9

Density = 30 X 24.5


Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available


The DAT®2020S comes equipped as standard equipment with an integrally attached ground floor that will hold up to 100 gallons (400 liters) of water (with an 8”/20 cm berm approx.) before requiring pump out, 2 roll up windows – one on each side, 1 skylight, full closure slip in and out dirty entry/clean exit doors on each end, 1 air inflation/deflation valve, one high pressure air fill valve and air inflation hose w. safety cord, 1 pressure relief valve, 4 metal stakes and ground anchor points, one 19”/48 cm HVAC Hanging Duct, 1 small electrical duct, Tie Down Ropes and 4 D-rings to tie off to, Repair kit, manual, shelter sleeve, 2 upper air vents, and hammer. All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units can attach to a 2nd shower/FSI Shelter.

The DAT®2020S also comes complete with a qty. of 7 spray nozzle heads (one overhead) and a single 5’ (150 cm) length of coiled ½”/13 mm hose with an attached multiple function spray gun with spray patterns and flows meant to gently yet thoroughly drench and decon victims. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. Flows per shower head and per spray gun = approx. 1 gpm/4 lpm optimum and dependent on water volumes available. 

Simply inflate the unit and plug into a water supply. DAT®2020S offered with 1 – ¾” (19mm) high pressure 300 psi (20 bar) GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in less than 1 minute.


Comes complete with electric inflator/deflator, stakes, repair kit and high pressure SCBA fitting.

Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future.

DAT®2020S Approx. 7’ W X 7 L X 8’ H (2.13 M X 2.13 M X 2.43 M), 50 sq. Ft. (4.65M²), 90 lbs. (40 Kg) Carton size approx. = 134 X 73 X 48 cm (53” L X 29” W X 19” H)


  • 1100 dtex material is 1.5mm thick and  consists of 0.62mm plastomer coated PVC/0.3mm polyester yarn/0.62mm plastomer coated PVC

**All FSI Portable Hazmat Decon Shower Systems are in conformance with the performance requirements of the new ANSI # 113-200X American National Standard for Fixed and Portable Decontamination Shower Units.