DAT3030S

PDFPrint
DAT3030S.jpg

DAT3030S Portable Pneumatic Hazmat Decon Shower - Approx. 10’ W X 10’ L X 9’ H, 100 sq. Ft., 139 lbs. 2 Line Mass Casualty Decon Shower System that can handle two non-ambulatory stretchers or 4 ambulatory personnel or combinations of the above

Description

DAT3030S Portable Pneumatic Hazmat Decon Shower - Approx.  10’ W X  10’ L  X  9’ H,   100 sq. Ft., 139 lbs. 2 Line Mass Casualty Decon Shower System that can handle two non-ambulatory stretchers or 4 ambulatory personnel or combinations of the above

Files:
Name File size    
dat3030s_lit 88.15 KB

 

Technical Specs

FSI # DAT® 3030S  2-LINE NON-AMBULATORY DECON SHOWER MASS CASUALTY SYSTEM

080111mc

Frame: Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemical resistant, quadruple overlapped and glued. Canopy:   Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. ‘A’ burn scale rating. All seams double stitched and coated both sides.

Inner canopy: If applicable - of 100% NYLON 210T ANTRON W/R, POLYURETHANE COATED 57/58", Color: White - Flame Retardant to meet 'NFPA-701 TM-1', Anti-fungus/Anti-mildew, opaque

Floor: PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) 660 grams per sq. mm 60” W.  

 

Standard color is ‘FSI Blue’®. Green, White, and Tan/Sand also available as standard. Other colors offered P.O.A.

 

Technical data:

Air pressure internally once inflated = 4.3 psi (0.3 bar)

USA Federal Standard FS # 191 5041/5102/5134/5970 Test Method Structural Test results

Total Weight (g/m2) – 1055

Thickness (mm) – 0.90

Cut strip tensile strength (lbs. /in.) – Warp = 450 - Weft = 404

Elongation (%) – Warp = 30 - Weft = 47

Tongue tear (lbs.) – Warp = 87 – Weft = 100

Adhesion (lbs. /in.) – Warp = 9.4 – Weft = 8.9

Density = 30 X 24.5

 

Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available

The DAT®3030S is a 2 (two) line system designed to handle 2 non-ambulatory personnel on stretchers with attendants working on either side of the victim inside the unit, or the DAT3030S can handle 1 non-ambulatory and two ambulatory, or 4 ambulatory personnel at any one time.

 

The DAT®3030S comes equipped as standard equipment with an integrally attached ground floor that will hold up to 200 gallons of water (with an 8”/20 cm berm approx.) before requiring pump out, 2 roll up windows – one on each side, 2 skylights, full closure slip in and out dirty entry/clean exit doors, eight 19”/48 cm dia HVAC/clothes inlet/outlets with tie closures – 2 each on each end/side, 1 small electrical duct, 1 (one) center divider curtain, 2 (two) ½ cross divider curtains, 1 ea. high pressure and low pressure inflation deflation valve, one air inflation hose w. safety cord, 1 pressure relief valve, 4 metal stakes and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, shelter sleeve, 2 upper air vents, and a hammer.   All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms.   Units can attach to a second shower or FSI shelter. Simply inflate the unit - plug into a water supply and commence decon in 1 – 2 minutes.

 

The DAT® 3030S also comes complete with a with a qty. of 14 spray nozzle heads and qty. of 4 (four) 5’/1.5 M lengths of coiled ½”/13 mm hose with attached multiple function spray guns with shutoffs and quick disconnects offering spray patterns and flows meant to gently yet thoroughly drench and decon victims. Flows per shower head and per spray gun = approx. 1 gpm/4 lpm optimum and dependent on water volumes available.

 

DAT®3030S Approx. 10’ W X 10’ L X 9’ H (1.52 X 3.05 X 2.73 M), Approx. 100 sq. Ft. (9.3M²) 139 lbs. (63 Kg) Carton size approx. = 131 X 108 X 68 cm (52” L X 43” W X 27” H)

 

As an option -- one can double the capacity if required.

     

Simply inflate the unit and plug into a water supply - unit is offered with 2 – ¾” (19mm) high pressure 300 psi (20 bar) GHT threaded inlet hoses – other fittings available as specified.

 

Comes complete with electric inflator/deflator, and high pressure scba fitting.

Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future.

 

* 1100 dtex material is 1.5mm thick and  consists of 0.62mm plastomer coated PVC/0.3mm polyester yarn/0.62mm plastomer coated PVC

 

**All FSI Portable Hazmat Decon Shower Systems are in conformance with the performance requirements of the new ANSI # 113-200X American National Standard for Fixed and Portable Decontamination Shower Units.