DAT QE3535S

PDFPrint
DAT_QE3535S.jpg

2-Line 3 or 4 stage Mass Casualty Decon Shower System, Approx. 10' W X 15" L X 9' H, 150 sq. ft., 165 lbs., Undress/Detergent Shower/Rinse Shower/Redress configuration. Decon 2 to 4 ambulatory personnel, 2 non-ambulatory or any combination at one time.

Description

2-Line 3 or 4 stage Mass Casualty Decon Shower System, Approx. 10ft W X 15" L X 9ft H, 150 sq. ft., 165 lbs., Undress/Detergent Shower/Rinse Shower/Redress configuration. Decon 2 to 4 ambulatory personnel, 2 non-ambulatory or any combination at one time. Each line is 4ft undress, 7ft detergent/rinse shower area, 4ft redress section

 

Files:
Name File size    
2011_dat_qe_shelters 1001.09 KB

decon_manual_2016 5.92 MB

Technical Specs

FSI DAT® QE3535S Two Line Mass Casualty Decon Shower System    

 

The FSI model DAT® QE3535S is a two-line wide (5' W, 5' W), 4 station mass casualty decon shower system which handles two parallel lines of casualties at the same time in four sequential stations --- (1) undress 4’ section, (2) detergent shower & (3) rinse shower in a 7’ section, (4) redress 4’ section – 1.2 M/2.13 M/1.2 M. This unit deploys in approx. 3 minutes, and processes 2 or 4 ambulatory personnel at a time, and/or 2 non-ambulatory personnel at one time or any combination.

 

Undress and redress stations are dry (plumbing is possible and optional); each of the four shower stations include 3 showerheads and one hanging coiled ½”/13 mm hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. There are a total of 4 multiple function spray nozzle guns and 4 sections of 3 shower heads for a total of 16 water discharge ports as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option -- by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.

  

Wastewater is contained within integral ground floor and 6” (15 cm) high pop up water berm when system is initially set up (holds approx. 200 gallons/800 litres of waste water before pump-out is required).

 

Includes separate “dirty” entry and “clean” full sized exit doors, center divider curtain to separate lines 1 and 2, 6 ½ cross divider curtains, 2 – ¾” (18mm) High pressure 300 psi (20 bar) GHT threaded inlet hoses – other fittings available as specified, reflective air vents at each end.. All canopy walls are velcro’d to the floor berms for air lock.

 

Technical data:

 

Frame: Heavy duty patent pending lattice framework retractable, corrosion resistant, coated, lightweight aluminum tubing. Frame supports 250 lb. hang weight +. Width: 45mm Thickness: 1.2mm Weight: 570g / m2 Tensile strength: 17 Kg/mm2   Tear strength: 10 Kg/mm2   Canopy:   Heavy duty 420 denier nylon coated w. polyurethane (PVC) on both sides. UV/chemical resistant/fire retardant – UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds US Fed. Test CFR.1610, NFPA 702 w. ‘A’ burn scale rating. Floor: PVC coated HD .52 mm polyester.

 

‘Quick Erect’ General Set up and Tear down Instructions:

 

All parts are pre-assembled with no special tools required. All components are of telescoping aluminum with locking hinges, caps, and scissor connected support frames and guide rails for ease of movement for ‘Quick Erect’

 

To ‘Quick Erect’ simply release handle lock, have 2-4 support personnel grip side frame & pull the width support frames slowly – until all hinges lock. Ease roof frame upwards. Then pull the Length support frames until locked. Check and final position canopy, floor and decon pool. Commence use.

 

Weight approx. 165 pounds (75 kg)                   ‘Quick Erect’ size is 10’ W x 15’ L x 8’ H (3.04 M X 4.6 M X 2.43 M)

 

Carton size approx. = 149 X 78 X 58 cm (59” L X 31” W X 23” H).

 

Standard colors are Blue, Green. White. All units come equipped as standard equipment with an integral ground floor, 2 roll up windows, 2 skylights, roll-up, full zip, dirty entry/clean exit doors, 4 HVAC 14” (35 cm) air duct inlets/outlets w. tie closures – 2 per side (may also be used as clothes discharge outlets), 6 stainless steel stakes and ground anchor points, repair kit, manual, carry bag, 2 upper air vents, and hammer. Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side. Multiple colors available. Units can attach to a second shelter/shower system. Multiple optional accessories available inclusive of air and water heaters, air coolers, elevation grids, waste water pumps, etc. available.