A completely enclosed, portable, patient isolation room with 360 degree visibility of all inside occupants - designed for use inside a facility - can be adapted for positive or negative pressure air flow - ideal for use with F-PH700 air purifier. Designed to meet and exceed CDC requirement of 12 ACH / HR air exchanges per hour and 0.01 inches of water column of negative pressure when used with the appropriate air filtration products. Inflates in mere minutes and weighs less than 100 lbs. Once in place unit will remain in operation indefinitely. Approx. 5' X 5' X 8' H. With 8 sealed ports with caps for multiple applications and one complete set of valves - all in a carry bag.

A completely enclosed, portable, patient isolation room with 360 degree visibility of all inside occupants - designed for use inside a facility - can be adapted for positive or negative pressure air flow - ideal for use with F-PH700 air purifier. Designed to meet and exceed CDC requirement of 12 ACH / HR air exchanges per hour and 0.01 inches of water column of negative pressure when used with the appropriate air filtration products. Inflates in mere minutes and weighs less than 140 lbs. Once in place unit will remain in operation indefinitely. Approx. 9' X 12' X 8' H. With 8 sealed ports with caps for multiple applications and one complete set of valves - all in a carry bag.

A completely enclosed, portable, patient isolation room with 360 degree visibility of all inside occupants - designed for use inside a facility - can be adapted for positive or negative pressure air flow - ideal for use with F-PH700 air purifier. Designed to meet and exceed CDC requirement of 12 ACH / HR air exchanges per hour and 0.01 inches of water column of negative pressure when used with the appropriate air filtration products. Inflates in mere minutes and weighs less than 130 lbs. Once in place unit will remain in operation indefinitely. Approx. 9' X 9' X 8' H. With 8 sealed ports with caps for multiple applications and one complete set of valves - all in a carry bag.

Portable HVAC - 10.0 Ton / 123,000 BTU AC Unit with 30KW (102,300 BTU / h of heat. Each KW is 3410 BTU / H). Includes (2) Supply (2) Return. Unit includes Temp Controller, Temp Controller Cable, (4) 25' Ducts, Equipment Rack and Cam-Lok connection. 220V / THREE PHASE / 60HZ. For Export available as 400V / 3PH / 50Hz. Dimensions 58" H X 98" L X 62" W approx. 1200 lbs. With Hubble generator plug as standard unless otherwise specified. 35,000 + Kw prime required in a diesel generator to power up and operate this unit. UL Listed USA and Canada, ARI, 14SEER Energy Star ADD THE F-HVACCART.

Portable HVAC - 12.5 Ton / 156,000 BTU AC. Unit includes (2) Supply (2) Return. Unit includes Temp Controller, Temp Controller Cable, (4) 25' Ducts, Equipment Rack and Cam-Lok connection. 220V / THREE PHASE / 60HZ. For Export available as 400V / 3PH / 50Hz. Dimensions 58" H X 98" L X 62" W approx. 1647 lbs. With Hubble generator plug as standard unless otherwise specified. 35,000 + Kw prime required in a diesel generator to power up and operate this unit. *Optional F-DI-10KW-RHK Resistance heater needed to produce heat when ambient temperature drops below 40 degrees. UL Listed USA and Canada, ARI, 14SEER Energy Star ADD THE F-HVACCART.

Portable HVAC - 2.5 Ton / 30,000 BTU AC - 30,000 BTU Heat Pump. Unit includes power cable with plug end, thermostat, thermostat cable and 2 ducting (14" X 8'). Please specify 220V / 1ph / 60hz or 220V / 3ph / 60Hz. For Export available as 220V /1 or 3 phase / 50hz - please specify. 29”H X 59”L X 33”W. 330LBS. With Hubble generator plug as standard unless otherwise specified. 18,000 + Kw prime required in a diesel generator to power up and operate this unit. *Optional F-DI-10KW-RHK Resistance heater needed to produce heat when ambient temperature drops below 40 degrees. UL Listed USA and Canada, ARI, 14SEER Energy Star ADD THE F-HVACCART.

Portable HVAC - 3.5 Ton / 42,000 BTU AC - 40,000 BTU Heat Pump. Unit includes power cable with plug end, thermostat, thermostat cable and 2 ducting (14" X 8'). Please specify 220V / 1ph / 60hz or 220V / 3ph / 60Hz. For Export available as 220V / 1 or 3 phase / 50hz - please specify. 40”H X 56”L X 35”W. 425LBS. With Hubble generator plug as standard unless otherwise specified. 18,000 + Kw prime required in a diesel generator to power up and operate this unit. *Optional F-DI-10KW-RHK Resistance heater needed to produce heat when ambient temperature drops below 40 degrees. UL Listed USA and Canada, ARI, 14SEER Energy Star ADD THE F-HVACCART.

Portable HVAC - 4.0 Ton / 48,000 BTU AC - 46,000 BTU Heat Pump. Unit includes power cable with plug end, thermostat, thermostat cable and 2 ducting (14" X 8'). Please specify 220V / 1ph / 60hz or 220V / 3ph / 60Hz. For Export available as 400V / 3PH / 50Hz. 35 / 41AMP. 42”H X 60”L X 34”W. 525LBS. With Hubble generator plug as standard unless otherwise specified. 18,000 + Kw prime required in a diesel generator to power up and operate this unit. *Optional F-DI-10KW-RHK Resistance heater needed to produce heat when ambient temperature drops below 40 degrees. UL Listed USA and Canada, ARI, 14SEER Energy Star ADD THE F-HVACCART.

Portable HVAC - 5.0 To n/ 60,000 BTU AC - 60,000 BTU Heat Pump. Unit includes power cable with plug end, thermostat, thermostat cable and 2 ducting (14" X 8'). Please specify 220V / 1ph / 60hz or 220V / 3ph / 60Hz. For Export available as 400V / 3PH/50Hz. 52/61AMP. 42”H X 60”L X 34”W. 550LBS. With Hubble generator plug as standard unless otherwise specified. 18,000 + Kw prime required in a diesel generator to power up and operate this unit. UL Listed USA and Canada, ARI, 14SEER Energy Star ADD THE F-HVACCART.

FSI® Adult Scrimmed Reinforced Biohazard Disaster Pouch, FEMA Blue color, 36" W X 92.5" L, 6 handles, envelope style, 2-way zipper with 2 pull tabs, maximum weight = 375 lbs.

FSI® Adult Biohazard Disaster Pouch, 42" W X 90" L, 20 mil black vinyl, 8 padded handles, envelope style 2-way zipper with 2 pull tabs, and 3 ID tags.

FSI® Large Adult Water Recovery Body Bag, 36" W X 94" L, High Visibility Yellow Bag has a 10 handle high strength for ease of handling in and out of water. Full Size Three sided zipper. High Strength mesh to drain water. Unique Custom Floater Grips for zipper pulls.

Autopsy Table medical grade stainless steel, molded body support tray to contain all fluids; folds flat, adjusts from 21" - 32" H with 4 locking caster wheels, 80" L X 31" W, 55 lbs., weight capacity 500 lbs. FDA Medical Device # D037122. Designed and built in accordance with FEMA guidelines.

Mortuary Supplies Storage Box, heavy duty molded plastic with 6 casters (2 are locking), complete with weather seal - 36" X 36" X 83" L, and can accommodate 5 F-ER500183, 8 F-EA500A, 8 F-EW5002, 15 F-EC50021. Designed and built in accordance with FEMA guidelines.

Cadaver Support Deck medical grade stainless steel, molded patient support deck, folds flat, 80" L X 31'W X 21" H, 38 lbs.. 500 lb. capacity. FDA Medical Device # D037122. Designed and built in accordance with FEMA guidelines.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Adult packaging of 5 boards = 81" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Adult packaging of 5 boards = 81" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Pediatric packaging of 5 boards = 58" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Pediatric packaging of 5 boards = 58" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Pediatric packaging of 5 boards = 58" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

Economy Portable Field Hospital Bed /Cot with approx. 1.5” Thick FR Mattress Pad, head and foot adjustments, IV Pole, 350LB capacity, 21”H X 28”W X 83”L (53cm H X 71cm W X 210cm L). Weight 35 LBS.

Economy Portable Field Hospital Bed / Cot with approx. 1.5” Thick FR Mattress Pad, head and foot adjustments, IV Pole, 350LB capacity, 15”H X 28”W X 83”L (38cm H X 71cm W X 210cm L). Weight 35 LBS.

Economy Portable Field Hospital ‘Procedure 30” H type’ Bed / Cot with 4 Drop down side rails (2 per side), 1.5” FR Mattress Pad, head and foot adjustments, IV Pole, 350LB capacity, 30”H X 28”W X 83”L (76cm H X 71cm W X 210cm L). Weight 47 LBS.

Economy Portable Field Hospital Bed / Cot with 4 Drop down side rails (2 per side), 1.5” FR Mattress Pad, head and foot adjustments, IV Pole, 350LB capacity, 15”H X 28”W X 83”L ( 38cm H X 71cm W X 210cm L). Weight 37 LBS.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Adult packaging of 5 boards = 81" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

Superior Portable Field Hospital Bed / Cot with approx. 3” Thick Waterproof Mattress Pad, 3 head and 2 foot adjustments, IV Pole, 500 LB capacity, 19” H X 31” W X 80” L (48cm H X 78cm W X 202cm L. Weight approx. 50 LBS.

Premium Portable Field Hospital ‘Procedure 30” H type’ Bed / Cot with 4 Drop down side rails (2 per side), extra thick comfort 3” cushion FR Mattress Pad, head and foot adjustments, IV Pole, 550 LB = capacity using 1.50 mm HD framing, 30”H X 33”W X 83”L (76cm H X 84cm W X 210cm L). Weight 48 LBS.

Premium Portable Field Hospital Bed /Cot with 4 Drop down side rails (2 per side), extra thick comfort 3” cushion FR Mattress Pad, head and foot adjustments, IV Pole, 550 LB + capacity using 1.50 mm HD framing. 15”H X 33”W X 83”L (38cm H X 84cm W X 210cm L). Weight 48 LBS.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Adult packaging of 5 boards = 81" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.

The Transporter® Fluid Resistant Disposable Backboards are packaged in boxes of 5 and take up little space since they store flat. (Adult packaging of 5 boards = 81" L x 28" W x 6" H). When needed simply pull the zip tabs on the back of the boards and in less than 30 seconds a fully configured backboard is in place and ready to go to work. There is no glue or tape to dry out and fail over time. These boards are significantly lower in costs than all other backboards.