 |
 |
 |
|
The DAT®4070S is a four-line (43.5” /1.1 M X 4 Lines W), 3 or 4-station mass casualty decon shower which handles four parallel lines of casualties at the same time in three or four sequential stations - (1) undress, (2) detergent shower # 1 - (3) rinse shower # 2 OR handle 2 personnel in separate showers simultaneously in each lane, (4) redress. This unit deploys in under three minutes, processes four non-ambulatory patients on stretchers or up to 8 ambulatory personnel at a time and/or any combination of the above.
Shower / Shelter Setup HD
Shower / Shelter Teardown Instructions HD
- Dimensions - Approx. 14.5′W X 23′L X 9′H
- Area - 330 sq. ft.
- Weight – 340 lbs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Heavy Duty Air Berms – FSI utilizes extremely heavy duty air berm construction in all DAT® series mass casualty portable hazmat decon shower systems. FSI uses the same 1100Dtex, quadruple overlapped and glued berms found in our wide range of transom rescue boats – known for the extreme conditions they are subjected to.
- Extremely Rapid Deployment – FSI Portable Shower Systems are compact, fully integrated, and supplied complete in a heavy duty carry sleeve/bag. FSI Shower systems inflate virtually unaided – with the use of compressed air, or via a supplied electric inflator/deflator with a hands-free connector within minutes (size of unit and method of inflation dependent). The inflatable decontamination shower units are meant to be deployed simply and quickly – with modest training and few personnel.
- Heavy Duty Construction – No matter which model or size, FSI shower systems offer incredible stability even in high wind conditions up to 70 mph (115 kph) and more when properly tied down/staked off.
- ANSI #113 COMPLIANT - IDEAL FOR GROSS DECON PER NFPA1851
|
|
|
|
|
|
|